Extractor Parts
Extractor Parts
| Fp231a | Drain Gate for Cobra-H and EC | $62.00 | ||
| Edrain-1 | Drain Gate for all Edge Extractors | $35.00 | ||
| r | Edome-1 | Vacuum Dome for all Edge and Sphere Extractors | $63.00 | |
| s | Fp207 | Heat Exchanger for Cobra-H | $375.00 | |
| Fp158 | Heat Exchanger for Cobra-DLX | $375.00 | ||
| Fp313 | Heat Exchanger for Cobra-EC | $475.00 | ||
| EHeater-1 | Heat Exchanger for Edge Single Cord | $210.00 | ||
| EHeater-2 | Heat Exchanger for Edge Dual Cord | $260.00 | ||
| t | 901 | Solution Lid for Cobra-H, DLX, and EC | $36.00 | |
| u | Ssfw-1 | Stainless Steel Floor Wand | $299.00 | |
| v | Filter-1 | Filter screen for Cobra Extractors | $19.00 | |
| EFilter | Filter screen for Edge Extractors | $12.00 | ||
| w | Fp194b | Heat repair kit for Cobra-DLX | $280.00 | |
| Fp194c | Heat repair kit for Cobra-H | $330.00 | ||
| x | Fp256b | Heat repair kit for Cobra-EC and some DLX models | $87.95 | |
| y | E190TH | Heat repair thermostat for Edge Extractors 190 | $15.00 | |
| E230TH | Heat repair thermostat for Edge Extractors 230 | $14.75 | ||
| z | Enb-1 | Neck Barb for Edge Extractors | $8.95 | |
| a1 | Cfan-1 | Cooling Fan for Cobra Extractors | $34.95 | |
| a2 | Gasket-1 | Dome Gasket for Cobra-H and Cobra-DLX | $17.25 | |
| a3 | Dome-ec | Vacuum Lid for Cobra-EC and Cobra-H (New Style) | $48.00 |
| ITEM | CODE | DESCRIPTION | PRICE | |
| a | H21 | Male Quick Disconnect | $9.50 | |
| b | H24 | Female Quick Disconnect | $15.50 | |
| c | JET-1 | Stainless retaining plate w/ screws | $8.40 | |
| d | H27 | Tee-Jet spray nozzle for Hand Wand | $9.55 | |
| e | CBrush-1 | Replacement brush for Cobra-H vacuum motors | $6.25 | |
| CBDLX | Replacement brush for Cobra-DLX vacuum motors | $8.95 | ||
| f | 8000-812-288 | 100psi demand pump for most extractors | $147.00 | |
| 8000-532-256 | 60psi demand pump for most extractors | $120.00 | ||
| g | Vac-1 | 2- stage vacuum motor for Cobra-H | $90.00 | |
| DLXVAC | 3- stage vacuum motor for Cobra-DLX | $255.00 | ||
| EVac-1 | 3- stage vacuum motor for Edge/Sphere/Cobra-EC | $150.00 | ||
| h | V1243 | Valve repair kit | $9.55 | |
| i | Hangar | Valve Hangar | $5.60 | |
| j | V1245 | Valve Assembly for Hand Wand | $20.25 | |
| k | Dome-1 | Vac Dome for Cobra-H
and DLX *Gasket sold separately |
$42.95 | |
| l | Spst-1 | On/Off lighted switch for all Cobra Models | $26.00 | |
| Espst-1 | On/Off switch for Edge and Sphere extractors | $25.20 | ||
| m | Sshw-1 | Stainless Steel Hand Wand | $115.00 | |
| n | VHose | 15' 1-1/2" Vacuum Hose | $42.00 | |
| VHose1/4 | 15' 1-1/4" Vacuum Hose | $30.00 | ||
| o | Sol-15 | 15' Solution Hose 1/8" | $58.95 | |
| p | Ssct-1 | Stainless Steel Crevice Wand | $115.00 | |
| q | Fp231 | Drain Gate for Cobra-DLX | $62.00 |